產品介紹

站駕式前移電動堆高叉車采用配罝成熟可靠的美國科蒂斯電控系統，安裝采用全封閉式結構，保證電控免受污染和水濺。

重要零部件都經過了嚴格的試驗，保證了整機的性能。整機電路具有過熱保護、反接保護、防短路等功能。

整車設有開關及緊急斷電開關。

當貨叉起升到最高點時，本車使用了機械限位和電器限位的雙重安全保護。

站駕式前移電動堆高叉車當轉向角度超過+20°時，行駛速度自動降低。

當電氣系統有任何故障發生時，車輛自動停止運行。

廣泛應用于電力、石油、化工、制藥、紡織、軍工、油漆、顏料、煤炭、及港口、鐵路、貨場的倉庫車間等場所,大大提高了工作效率,降低了工人勞動強度.是必不可少的裝卸設備.

AdoptsAmerican Curtis electric control systemwith reliable configuration;installsina fully enclosed structure, to ensure that the electronic control against contamination and water splash.

Important accessories were through the strict test, to ensure the performance of the machine.

The whole circuit has over-heat protection, reverse polarity protection, short circuit proof and other functions.

The folklift has a switch and an emergency-off switch.

When folk rising at the highest point,there are double safety protections as electrical and mechanical limit stop.

Widely used in electricity, petroleum, chemical, pharmaceutical, textile, military, paints, pigments, coalindustries, and used on ports, railways, freight yard warehouse workshops and other places, greatly improving the work efficiency, reduce labor intensity , and this is essential handling equipment.

產品特點

1、設計新穎，維護方便，操作靈活，經濟實用。適用于堆高，裝卸作業。

2、惠澤牌站駕前移式電動堆高叉車動力提升，提升速度可控快慢。

3、站駕前移式電動堆高叉車采用進口液壓動力單元，集成一體化，噪音低。

4、本款站駕前移式堆高叉車門度由高強度進口材料制造。

產品展示

物流發貨

售后信息

1.站駕大前移電動叉車整車保修一年

2.易損件為前輪后輪,正常磨損不在保修范圍內,如脫膠在保修范圍內

3.液壓缸確保不漏油,與鏈條接軌正常,一年內正常保修

4.24小時到48小時內到達或解決

5.站駕大前移電動叉車提供操作視頻講解更換配件

6.終身提供惠澤牌電動前移式電動堆高叉車配件

鄭重承諾

不好使用包退換！